FD30 fire door installation specialist working in Birmingham
BAFE & BM TRADA Accredited

FD30 Fire Door Installation

Installed right, first time. Certified FD30 assemblies fitted to BS 8214:2016 and Approved Document B, with full completion documentation.

Request a Free Assessment Call Us Email Us

BAFE Registered | BM TRADA Q-Mark Accredited | BS 8214 Compliant Installations | FD30 & FD60 Supply and Install

Overview

FD30 Fire Door Installation in Birmingham — BAFE & BM TRADA Accredited

LF Property Solutions provides professional FD30 fire door installation across Birmingham and the West Midlands, carried out by BAFE-registered engineers with BM TRADA Q-Mark accreditation. Every installation is completed to BS 8214:2016 and Approved Document B so your fire compartmentation is properly restored and fully evidenced.

An FD30-rated fire door is designed to resist fire and smoke for at least 30 minutes, but that rating only applies when the full assembly is installed correctly. Door leaf, frame, seals, closers, glazing, and ironmongery must all be compatible, specified correctly, and installed by competent specialists.

Placeholder image for FD30 fire door installation in Birmingham

Key Components of a Compliant FD30 Assembly

  • Third-party certified FD30 door leaf
  • Correctly sized and fixed frame
  • Intumescent seals to edge or frame rebate
  • Cold smoke seals for early-stage smoke control
  • Self-closing device that fully latches every cycle
  • Fire-rated hinges, latches, and lock hardware
  • Fire-rated glazing with compliant intumescent systems
Compliance

Why Correct FD30 Installation Matters

Placeholder image showing fire door compliance inspection checks

Under the Regulatory Reform (Fire Safety) Order 2005, Fire Safety Act 2021, and Fire Safety (England) Regulations 2022, building owners and responsible persons must ensure fire doors are correctly installed and maintained. Following increased enforcement under the Building Safety Act 2022, installation quality is now under greater scrutiny by risk assessors, insurers, and enforcement teams.

A certified door leaf fitted incorrectly can still fail in a live fire event and may not satisfy compliance obligations. Using BAFE-registered installers with BM TRADA Q-Mark accreditation helps provide the competence evidence and documentation expected by housing associations, NHS trusts, managing agents, and regulatory stakeholders.

How We Deliver

Our FD30 Installation Process

  1. 01

    Site Assessment

    Free initial site review to confirm scope, door configurations, and any frame or wall-prep requirements.

  2. 02

    Specification & Procurement

    FD30 assemblies sourced from certified manufacturers. We do not supply uncertified components.

  3. 03

    Installation

    Installations completed to BS 8214:2016 and manufacturer instructions, including seal, closer, and hardware sign-off.

  4. 04

    Completion Documentation

    Written report with specification, component certification, and photographic evidence.

Client Sectors

Who We Install FD30 Fire Doors For

  • Housing associations and social landlords
  • Commercial freeholders and managing agents
  • NHS trusts and healthcare facilities
  • Main contractors and developers
  • Private landlords and block management companies
Placeholder image for FD30 and FD60 fire door specification guidance

FD30 vs FD60: Which Specification Do You Need?

FD30 is typically used for many residential and commercial internal applications. FD60 may be required in higher-risk or specific code-defined locations. If you are unsure, we can advise during your free assessment.

Request a Free Assessment
Related Fire Safety Services

Part of a Wider Compliance Programme

Following installation, our fire door inspection service helps maintain compliance over time. For broader projects, we also deliver passive fire protection programmes and compartmentation surveys where breaches have been identified.

FAQ

FD30 Fire Door Installation Questions

There is no single legal requirement naming one accreditation body, but Approved Document B and BS 8214 require competent installation in line with manufacturer instructions. In practice, many housing associations, NHS trusts, and insurers require BAFE registration or BM TRADA Q-Mark accreditation as a contractual minimum.
Sometimes, but only after assessment. The frame must be structurally sound, correctly sized, and compatible with the new certified assembly. Many older frames are not suitable and can invalidate the fire rating if reused inappropriately.
A straightforward single door replacement can take around two to four hours. Where frame replacement or structural corrections are required, allow up to a full day per door. For larger programmes, we provide phased schedules to minimise disruption.
Yes. Every installation includes written completion documentation confirming specification, component certification, installation standard, and photographic evidence suitable for your building's fire safety file.
Yes. We provide ongoing fire door inspection services following installation so duty holders can maintain continuous compliance under current fire safety requirements.
We are based in Birmingham and cover the West Midlands including Wolverhampton, Coventry, Solihull, Walsall, and surrounding areas, as well as wider UK programmes for portfolio clients.

Request a Free FD30 Installation Assessment

BAFE-registered and BM TRADA Q-Mark accredited fire door installers covering Birmingham and the West Midlands.

Request a Free Assessment Call Us Email Us